5108 Wet Look Acrylic Enamel Hardener

Category

Activators and Catalysts are a mixture of polyisocyanates, solvents and additives. Catalysts differ in the type of isocyanate used, the percent solids of isocyanates, and the solvent blends. The type of and amount of isocyanate will control the rate of cure, durability, gloss level, UV resistance, hardness, chemical resistance, etc. The solvent blend will determine the flow out and dry times.

Catalysts are formulated for specific types of resins, functionality of the resins, percent solids, etc. This is why there are many different types of catalysts. Therefore, it is important that catalysts are used as recommended by the paint manufacturer. Enamel catalysts are commonly referred to as "HARDENERS" and urethane catalysts are known as "ACTIVATORS".

5 STAR XTREME Autobody Products Enamel Hardeners are offsets to the major paint companies and are designed for use in all synthetic and acrylic enamel topcoats. Some of the urethane activators are direct offsets and thus can be used in the appropriate paint systems.

Sizes:

5108-8 Wet Look Acrylic Enamel Hardener - Pint
5108-14 Wet Look Acrylic Enamel Hardener - 1/4 Pint


Products by Category

Masking Products

Cleaners

Thinners, Reducers and Solvents

Hardeners

Basecoats

Bodyfillers and Putties

Primer Surfacers and Sealers

Clearcoats and Activators

Custom Factory Pack Paints

Intermix System Single Stage Coatings

Specialty Aerosols

Body Shop Supplies

Download Our Catalog

Download Our Low VOC Catalog

5 STAR XTREME on Facebook

5 STAR XTREME on Facebook